MIL-HDBK-1897(AT)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed below are not necessarily all of the documents referenced herein, but are the ones that are needed in order to fully understand the information provided by this handbook.
2.2 Non-Government publications. The following documents form a part of this handbook to the extent specified herein. Unless otherwise specified the issues of the documents which are
DoD adopted are those listed in the latest issue of the Department of Defense Index of
Specifications and Standards (DoDISS), and supplement thereto.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/ASME B46.1 - Surface Texture (Surface Roughness, Waviness, and Lay) (DoD Adopted).
(Application for copies should be addressed to the American National Standards Institute, 11
West 42nd Street, New York, NY 10036.)
SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE)
SAE AMS 4640 - Aluminum Bronze Bars, Rods, Shapes, Tubes, and Forgings
81.5 Cu - 10.0 A1 - 4.8 Ni - 3.0 Fe Annealed (DoD Adopted).
SAE J448 - Surface Texture, Standard.
SAE J449 - Surface Texture Control, Recommended Practice.
(Application for copies should be addressed to the Society of Automotive Engineers, Inc.,
400 Commonwealth Drive, Warrendale, PA 15096.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business